Consuming Modbus Float Values

I am working with float values in Modbus holding registers. The float values us two concurrent registers. In other systems, there is a format setting that will read both of them to produce the float value. Is there a similar function in FX? It is an edge gateway application for consuming the values and publishing them via SpB.

Hi David,

We received your question and we are working on it.

Best Regards,
Tatsoft Team.

Hi David,

Can you do the test using this configuration in Edit > Devices > Points > “DataType”?

It will make you use just one value. Let us know if it helps you please.

Best Regards,
Tatsoft Team.

The DataType is current set to Single and it does not appear to combine the registers.

Hi David,

Could you please:
1 - Send us the project;
2 - Send us the trace log with option Device and Debug enabled as shown in the image below (you have to be running the project long enough for us to notice that the device is not working correct, a few minutes should be fine):


Bests,
Tatsoft Team.